Telstra Nighthawk M1 無法更新手動更新教學更新錯誤 OTA 韌體更新下載韌體 @ APOKE 阿婆K鵝的部落格 Apokeshop's 3C Blog

最近Netgeat M1 在2018/04/17 發出了一個關於韌體更新方法的公告

有些更新可以直接靠M1機器上的提示提示做更新

但有些bug像是伺服器超過負擔時或是Telsra的伺服器無法連線時會沒辦法做更新

這次官方更新方法有三種

1. 使用Netgear mobile 手機App做更新

Settings->Firmware->CHECK FOR UPDATES->DOWNLOAD UPDATE->START UPDATE

2. 直接下載做手動更新

先下載檔案後 https://goo.gl/SQor7K

然後到電腦版的webui做登入

SETTINGS-> Administration->Firmware Update->Choose File-> 選擇下載的檔案->UPLOAD

3. 用電腦瀏覽器到後台m.home做更新確認

SETTINGS-> Administration->Firmware Update->CHECK FOR UPDATES->DOWNLOAD->UPDATE

詳細官方公告

Some users may have taken up MR2.1 NTG9X50C_10.25.01.00 firmware via web update which broke Data Usage on MR1100-1TLAUS. MR2.2 NTG9X50C_10.25.01.01 was released to resolve the issue but there was a bug where the download button was greyed out when data usage was over the limit or Telstra data usage server could not be reached. This bug only exists in the WebUI and not the mobile app.

Please make sure your battery has sufficient charge or your device is plugged into wall plug before proceeding with the update. There are 3 options to perform the firmware update.

Option 1: Web update firmware via NETGEAR mobile app:

Login to the NETGEAR Mobile app as administrator. (default username: admin default password: admin)
Tap on Settings on the main dashboard.
Tap on Firmware.
Tap on CHECK FOR UPDATES button and wait for device to check the server.
Tap on DOWNLOAD UPDATE
Tap on START UPDATE
Device will then power OFF and boot into software upgrade mode. Do not remove the battery of power the device OFF when LCD is showing Updating Device.

Option 2: Manually update firmware via Telstra WebUI (http://m.home):

Download firmware file MR1100-1TLAUS_23113199_NTG9x50C_10.25.01.01_00_TELSTRA_03.22.secc.spk from the following link: https://www.downloads.netgear.com/files/firmware/MR1100/MR1100-1TLAUS_23113199_NTG9x50C_10.25.01.01_00_TELSTRA_03.22.secc.spk
Open the WebUI and login as (default username: admin default password: admin)
Click on SETTINGS on the main dashboard
Click and expand Administration
Click on Firmware Update
Click on Choose File
Browse to folder where you have downloaded firmware file MR1100-1TLAUS_23113199_NTG9x50C_10.25.01.01_00_TELSTRA_03.22.secc.spk downloaded in step 1 and select it.
Click on UPLOAD
Device will power OFF and boot into software upgrade mode. Do not remove the battery or power the device OFF when LCD is showing Updating Device.
You will see an Alert on the WebUI dashboard after the upgrade when the device boots up to indicate the upgrade was successful.

Option 3: Web update firmware via Telstra WebUI (http://m.home):

Open the WebUI and login as (default username: admin default password: admin)
Click on SETTINGS on the main dashboard
Click and expand Administration
Click on Firmware Update
Click on CHECK FOR UPDATES
Click on DOWNLOAD
Click on UPDATE
Device will power OFF and boot into software upgrade mode. Do not remove the battery or power the device OFF when LCD is showing Updating Device.
You will see an Alert on the WebUI dashboard after the upgrade when the device boots up to indicate the upgrade was successful.

Note: If you see message “Insufficient data to download update” and red stop cursor at step 3 or 4, please click on DOWNLOAD button as you can still proceed.

官方連結

https://kb.netgear.com/000055962/Why-can-t-I-see-data-usage-on-my-Telstra-Nighthawk-M1

Huawei 華為網卡分享器全型號請點

ZTE 中興網卡分享器全型號請點

夜鷹 Netgear網卡分享器全型號請點

Alcatel 阿爾卡特網卡分享器全型號請點

D-Link 友訊網卡分享器全型號請點

ASUS 華碩網卡分享器全型號請點

分享器增益天線請點

5G分享器 CPE插電款與隨身款全系列請點

4G分享器 CPE插電款與隨身款全系列請點

台灣全頻插卡即用sim卡無線路由器全系列請點